Measuring Functions - IKEA FIXA Bedienungsanleitung

INSTRUCTIONS FOR USE
Initial Operation
• Protect the laser spirit level
against moisture and direct sun
irradiation.
• Do not subject the laser spirit
level to extreme temperatures or
variations in temperature. As an
example, do not leave it in vehicles
for longer periods. In case of large
variations in temperature, allow the
laser spirit level to adjust to the
ambient temperature before putting it
into operation.
• Avoid heavy impact to or
dropping of the laser spirit level.
Damage to the laser spirit level can
impair its accuracy. After heavy
impact or shock, compare the laser
line with a known horizontal or
vertical reference line.
Switching On and Off
To switch on the laser spirit level, push
the On/Off switch (7). Immediately
after switching on, the laser spirit level
sends a laser beam out of the exit
opening (4).
• Do not point the laser beam at
persons or animals and do not
look into the laser beam yourself,
not even from a large distance.
To switch off the laser spirit level, push
the On/Off switch (7) again.
• Do not leave the switched on
laser spirit level unattended and
switch the laser spirit level off
after use. Other persons could be
blinded by the laser beam.

MEASURING FUNCTIONS

Note: The specified levelling accuracy
applies for the alignment of the laser
beam with reference to the spirit levels
(1), (3) and (5).
Positioning the laser spirit level
For precise alignment with the spirit
levels, the position of the laser spirit
level is important.
The specified levelling accuracy is only
achieved when the laser spirit level is
correctly positioned:
7 7