2-6-3. Anschluss des Stromkabels (Anschluss C2)
Vorbereitung: Kreuzschraubenzieher (Nr. 2), Serviceschlüssel (Projektorzubehör)
WARNUNG
Stellen Sie sicher, dass die Stromversorgung unterbrochen ist, bevor Sie das Stromkabel anschließen. Es besteht Brand- und
Stromschlaggefahr.
1
Führen Sie die Schritte
(Seite 86) aus.
2
Configure the power supply for C2 connection.
For C2 connection, connect the right-side connector.
3
Fix the plate inlet with the fixing screws (at four points).
1
7
bis
unter „2-6-2. Anschluss des Stromkabels (Anschluss C1)"
Connect the C2 connector.
Setting Up Your Projector
89