Assembly; Assembly Snow Shovel - Zipper Maschinen ZI-MD500HS Betriebsanleitung

14

ASSEMBLY

14.1 Assembly snow shovel

 Mount the mounting brackets (1) & (2) to the
blades using M10×25 hex bolts, washers and
nuts.
 Mount the bracket (4) to the mounting brackets (1)
& (2) using in total four M10x25 hex bolts and
washers
 Mount the bracket (5) onto the snow blade using 2
hex-bolts.
 Mount the Landing Leg weldment onto the snow
blade. Place the landing leg weldment into the
bracket and fix it with the hex bolt (6) and nut
(7).
 Install the already assembled snow blade onto
the machine with the two delivered pins.
 The snow blade can be tilted in three positions.
Straight position place bolt (1) in position
(Pos1). Tilt it to the right place bolt (1) in
position (Pos2). Tilt it to the right place bolt (1)
in position (Pos3).
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MD500HS
1
2
2 3
1
5
1
Pos3
ASSEMBLY
4
5
6
7
Pos2
Pos1
32