Zipper Maschinen ZI-MD500HS Betriebsanleitung Seite 30

















Switch of the engine and remove the ignition key (if is available):



ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-MD500HS
Work attentively, safety conscious and always be fully aware safe stand
when working! Caution on uneven work surfaces and work surfaces with a
slope!
Never operate the machine on slopes where the angle is over 30°!
Avoid use in wet grass. Risk of slipping!
Regular breaks reduce the security risk to loss of control due to fatigue.
Walk! Never run with the machine
Be especially careful when you turn the machine or move backwards!
Never use the machine on soft ground. Risk of tipping!
Take especially care, if the ground contains many stones or roots. An
unattended stalling of the drill might easily cause an accident!
Use personal safety equipment: ear protectors, safety gloves in EN 388,
class 3111, safety shoes S1, safety goggles or face protection when
working with the machine!
Never operate the machine without or with soft shoes!
Do not operate in an enclosed or confined areas.
Exhaust contains poisonous carbon monoxide. The exposure can cause
unconsciousness and death.
If the fuel tank has to be emptied it must be done outdoors. Keep the
drained fuel in a specially designated container or dispose of carefully
Never leave the machine running unattended! Before leaving the working
area switch the machine off and wait until the machine stops.
Switch off the machine before maintenance or adjustment.
Never remove the fuel tank cap when the engine is running or hot
Before check, clean or work on the machine
Before refueling
Always if you leave the machine
SAFETY
30