General Description; Functional Description - FLORABEST FLH 2500 A1 Originalbetriebsanleitung

GB
nism is started on a motor operated
machine.
CAUTION! The following states how
damage to the trimmer and possible
injury to people can be avoided:
• Handle the unit with care. Clean the ven-
tilation slits regularly; keep to the mainte-
nance instructions.
• Do not overload your device. Work
only within the indicated range of
performance. Do not employ any low
power machines for heavy work. Do
not use your device for purposes for
which it has not been designed.
• Only switch the shredder off once the
funnel feeder is completely empty since
the shredder may otherwise clog up and
not be able to start afterwards.
• Do not attempt to repair the shredder
yourself unless you are qualified to do
so. Any work not specified in this manual
may only be carried out by our service
centre.
Electrical safety
CAUTION! The following states how
to avoid accidents and injuries due to
electric shock:
• Use the tension relief provided for the fix-
ing of the extension cord.
• Damaged cables, coupling and plugs or
connecting leads not corresponding to
specifications, must not be employed.
Remove the plug immediately from the
plug socket in case of damage to the
mains cable.
Do not touch the mains power supply
cable under any circumstances until you
have pulled the plug out of the mains
socket.
8
• If the power cable for this equipment is
damaged, it must be replaced by the
manufacturer, a customer service agent
of the same or a similarly qualified per-
son in order to prevent hazards.
• Do not use the appliance if the on/off
switch does not work properly. Always
have a damaged switch repaired by our
Service Centre (See p. 17 for the ad-
dress).
• Only use extension cables that have
been approved for outdoor use and
are resistant to splash water. The core
diameter for extension cables measur-
ing up to 25 m must be at least 1.5 mm²,
and 2.5 mm² for cables longer than 25m.
Always roll the whole cable off the reel
before use. Check the cable for damage.
• Do not unplug the shredder by the cable.
Keep the cable away from heat, oil and
sharp edges.

General description

Functional description

The silent shredder is equipped with a pow-
erful motor and motor brake, overload pro-
tection with an auto-reverse system, and re-
start prevention for additional safety. A blade
cylinder system is used for cutting, which
works extremely quietly and automatically
draws in the shredding material. The sturdy
chassis ensures a stable standing position
with good mobility.
Refer to the following descriptions for a
functional description of the controls.
See the front fold-out page for il-
lustrations.