Whispbar K332W Fitting Kit Montageanleitung Seite 8

EN
Fitting Kit
K332W
Use hex screwdriver to reverse adjusting
screw 10 turns.
Press adjusting screw and pull crossbar
legs out. Refer to the crossbar instructions
for crossbar adjustment method.
Ensure each end of the crossbar is
adjusted equally.
Adjust crossbar in or out to suit vehicle.
Refer to the crossbar instructions for
crossbar adjustment.
Ensure that the crossbar is adjusted evenly
at both ends.
Please check the front of this manual for
information relating specifically to your
vehicle.
8