EdilKamin MAXIMA 24 Installations-, Betriebs- Und Wartungsanleitung Seite 80

Boiler output setting
To reset the temperature of the boiler OUTPUT water, proceed
as follows: from the HOME screen, press any key and then the
menu key, select BOILER and confi rm the selection
with the enter key .:
C O N S O L E
B O I L E R
C A L D A I A
ESC
Go to the BOILER STATUS screen, press the key once, go to
the SET BOILER screen, set the SET at the desired value using
the + and - keys, the temperature can be set from a minimum of
50°C to a maximum of 80°C.
S E T B O I L E R = 6 5
S E T C A L D A I A
6 5 °
ESC
Press the key to move to the next setting, press the ESC key
repeatedly to return to the HOME screen.
Boiler activation/deactivation
Navigating around the boiler menu with the
BOILER PELLET menu can be found; this setting is used if
the boiler is part of a DOMOKLIMA home automation system,
otherwise the factory setting must be maintained: ACTIVE
P E L L E T B O I L E R
C A L D A I A
A T T I V A
A C T I V E
ESC
INSTRUCTIONS FOR USE
=
key, the
P E L L E T =
- 76
-