EdilKamin MAXIMA 24 Installations-, Betriebs- Und Wartungsanleitung Seite 70

Synoptic panel
Status icons
Enable com-
fort Clima
The synoptic panel keypad is the main page from which you can switch on and control the boiler, as well as access all the con-
fi guration menus.
The central part consists of several tabs, each of which provides access to the specifi c features listed below.
In addition to the tabs usually displayed, there is an alarms tab, which is only active in the presence of one or more alarms.
Home tab
In this tab, you can view the main operating data of the boiler.
Using the plus/minus buttons, you can change the output tem-
perature of the boiler.
The message window displays the operating phases of the
boiler and any warning messages (see the section LIST OF
MESSAGES IN THE MESSAGE WINDOW).
The operating phases of the boiler are:
Date/Time
Output
temperature
setting
Boiler mes-
sage window
INSTRUCTIONS FOR USE
Comfort Clima
Home tab
Content of the
selected tab
Room tem-
perature
Output tem-
perature
Return tem-
perature
Operating
power
Output tem-
perature plus/
minus buttons
- 66
Pellet reserve
tab
tab
Comfort Clima tab
This tab displays the status of the Comfort Clima function. The
function is activated or deactivated by pressing the icon. With
the Comfort Clima function, when the boiler is on it will auto-
matically go to minimum power as soon as the room tempera-
ture reaches the set temperature. In this way the room will be
maintained at the desired comfort setting. Using the plus/minus
buttons, you can change the target room temperature.
The temperature sensor is mounted on the console.
Comfort Clima
on/off icon
Room
temperature
setting
NOTE: To use this feature, you must install a second boiler
touch console (optional) or a Domoklima graphic console (op-
tional) in the room where you want to control the temperature.
You can also use a remote control (optional) that allows you to
transmit the temperature to the boiler over a wireless connec-
tion.
-
Switching on /
switching off
Summer /
Winter
System
diagram
Open the local
settings menu
Opens the
menus
Toggles the dis-
play of: room-
temperature
and date/time
Temperature
plus/minus
buttons