VARI LITE® - VL3500™ S
Step 3. While pulling up on locking mechanism release, fit keyed holes onto raised mounting
buttons at bottom of enclosure. Slide forward and release locking mechanism to lock in
place. Ensure brackets are locked securely. (Always face brackets in same direction as
shown.)
WARNING: Ensure that the bracket locking mechanism is fully seated after the bracket is installed
on the luminaire.
Press up when
installing or releasing
12
L
U
ERIES
UMINAIRE
SER
Locking Mechanism
Raised Mounting Button
Once fitted over buttons,
slide forward to lock
in place
Figure 2-3: Installing Brackets on Luminaire Enclosure
31-July-2004
'
M
S
ANUAL
Truss Hook Bracket
Locked
Keyed Hole
Face brackets in
same direction for
all configurations
0 2.9678 .0019 0