Cleaning - vidabelle VD-7265 Bedienungsanleitung

5. Reduce the speed by pressing the button 'down' 3.
• To reduce the speed infinitely, press the 'down' button longer, until the
desired speed setting is reached. For fine adjustment, press the 'down'
button briefly.
6. Reduce the speed before turning off the device.
7. Turn off the power unit by sliding the power/function switch to center posi-
tion (see fig. C).
The indicator light turns off. The attachment stops rotating.
8. Disconnect the power adapter from the wall socket after each use.
• Do not apply too much pressure during treatment. That way you will
protect the motor and attachments, and at the same time avoid any
unpleasant heating of treated body parts.
• For optimum results, let the motor run at full speed without slow-
ing it down by applying pressure. Reduce the pressure, if the motor
slows down too much.
• The manufacturer recommends reducing the speed before turning
off the device, since the attachment will continue rotating at the
previously selected speed after restarting the device.
• The speed can only be adjusted while the power unit is turned on.
• The manufacturer recommends starting treatment at low speed and
then increasing it during treatment, as needed.
• The manufacturer recommends treating sensitive areas of skin or
thin nails at low speed, and thicker callus or thicker nails at higher
speeds.
Switch position
Left
Center
Right

CLEANING

Function
ON with anticlockwise rotation
AUS
ON with clockwise rotation
31