Default Subwoofer Setting - XTZ SPIRIT SUB12 Bedienungsanleitung

Home Cinema
System
Music System
9
Default subwoofer settings
In this case, the bassmanagement is performed by the AV Receiver or another external device. We rec-
ommend the following subwoofer settings (please use the LFE-Input for the connection to your amplifier):
Volume: 12 o'clock
Crossover: 160 Hz
Phase: 0°
Equalizer: REF (may be adjusted later)
Power-mode: AUTO or ALWAYS ON
Bassreflexport: Choose the preference from page 10
In this case, the bassmanagement is performed by the subwoofer. We recommend the following subwoofer
settings (please use the Line-In or High-Level-In for the connection to your amplifier):
Volume: Choose a volume level that fits to the other speakers of your system.
Crossover:
Choose a crossover frequency depending on the lower limit frequency of your speakers.
If you use small speakers, 100-150 Hz is reasonable, if your speakers are large, use
60-100 Hz.
Phase:
Set the phase in a way that offers the loudest bass in combination with your other
speakers at your listening position.
Equalizer: REF (may be adjusted later)
Power-mode: AUTO or ALWAYS ON
Bassreflexport: Choose the preference from page 10