Default Subwoofer Settings - XTZ EDGE SA-1 Bedienungsanleitung

Home Cinema
In this case, the bass management is performed by the AV Receiver or another external device. We recommend
the following subwoofer settings (please use any of the Line In inputs or the XLR Balanced input.)
System
Music System
In this case, the bass management is performed by the subwoofer. We recommend the following subwoofer
settings (please use any/both of the Line In inputs or the XLR Balanced input.)

Default subwoofer settings

Crossover
170 Hz
Phase
0°
Gain
9 o'clock
EQ
REF (may be adjusted later)
Parametric EQ
Off
Power-mode
AUTO or ALWAYS ON
Bass port
Left port open and right closed, more options are available on page 14.
Crossover Choose a crossover frequency depending on the lower limit frequency of your
speakers.
If you use small speakers, 100-150 Hz is reasonable.
If your speakers are large, use 60-100 Hz.
Phase Set the phase in a way that offers the loudest bass in combination with your other
speakers at your listening position.
Gain Choose a volume level that fits to the other speakers of your system.
EQ REF (may be adjusted later)
Parametric EQ Off
Power-mode AUTO or ALWAYS ON
Bass port Left port open and right closed, more options are available on page 14.
19