Dometic REFRIGERATION 8 serie Montageanleitung Seite 14

Installation
WARNING!
Pay attention to clean and residue-free
workmanship if silicone sealing com-
pound or similar is used elsewhere (e.g.
sealing of the ventilation grille frames).
There is a danger of fire if silicone threads
come into contact with hot parts or an
open flame.
Proposal 1
The lip seals (1) are installed at the bottom
and on each side in the installation recess (Fig.
6-8). A heat deflector plate (2) is installed in
the installation recess above the refrigerator.
Affix this plate to the caravan wall, do NOT
attach to the refrigerator!
Attach the deflector plate so that the heated
air escapes through the top ventilation grill into
the open air and no heat build-up can be pro-
duced.
1
1
Fig. 6
Proposal 2
Fasten the sealing lips to a stop bar on the rear
side (1), e.g. by gluing
The refrigerator is later pushed into the instal-
lation recess from the front. Ensure that the
seals abut the case evenly.
This installation option facilitates the removal
and installation of the appliance for servicing.
The cavity in-between the outer vehicle wall
and refrigerator is completely isolated from the
vehicle interior. Intrusion of exhaust fumes into
the living space is prevented. Fumes will esca-
pe through the upper ventilation grille to the
2
outside. The draught-proof installation does
not require a special exhaust gas duct to be
used.
i
Fig. 7
Deviations require the consent of the
manufacturer!
2
Fig. 8
12
1
Fig. 9