Wired Remote Control - Panasonic CZ-RD514C Bedienungsanleitung

WIRED REMOTE CONTROL

a
TIMER/CLOCK
MODE UP SELECT
OFF/ON DOWN SET
CLOCK CANCEL
c
b 6 7
Remote Control Display
a OPERATION LED
b OFF INDICATOR
c OPERATION MODE SELECTION INDICATOR
d TIMER/CLOCK SETTING DISPLAY
Lights up if Timer operation is selected
OFF Timer. To automatically switch
"OFF" the unit.
ON Timer. To automatically switch "ON" the unit.
Day to be selected
e FAN SPEED DISPLAY
TEMPERATURE SETTING DISPLAY
f
g ERROR CODE DISPLAY
Remote Control Preparation
CLOCK
1. Press
UP DOWN
2. Press
or
SET
3. Press to confi rm.
4. Repeat steps 2 and 3 to set the current time.
2
OFF / ON
FAN SPEED MODE
TEMP
AIR
SWING
RESET
CHECK
AC RC
10 9 8
6 different programs can
be set in a day (1 ~ 6)
Indicates the selected day
Indicates the next timer
operation day
Time to be selected
(10 minutes step)
to select current day.
Press the remote control's button
d
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
e
improperly.
f
2
TO SET TEMPERATURE
g
• Selection range: 16˚C ~ 30˚C.
1
3
TO SELECT OPERATION MODE
4
AUTO mode - For your convenience
3
• Unit selects operation mode during startup according to
2
temperature setting and room temperature.
HEAT mode - To enjoy warm air
5
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
4
TO SELECT FAN SPEED (5 OPTIONS)
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
5
TO ADJUST AIRFLOW DIRECTION
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
left/right and up/down automatically.
• In HEAT mode, if AUTO is set, the horizontal louver fi x at
predetermined position. The vertical louver swing left/right
after the temperature rises.
• For Hide-Away models, AIR SWING buttons are not in
use. Airfl ow direction can not be adjusted.
Press and hold for approximately 10 seconds to
6
show temperature setting in °C or °F.
Press and hold for 5 seconds to dim or restore the
7
unit's indicator brightness.
Press to restore the remote control's default setting.
8
Not used in normal operations.
9
Retrieve error code.
10
• During operation, the unit stops and both a and b is
OFF indicates abnormality occurs.
1. Ensure a is OFF, press
2. Press or
identifi ed, a will be ON continuously, then write down
the error code.
3. Press for 5 seconds to quit checking.
CHECK
4. Turn the unit off and reveal the error code to authorized
dealer.
for 5 seconds.
CHECK
. If error code and abnormality can be