RIDGID SeekTech ST-510 Bedienungsanleitung Seite 8

Direct Connect – The receiver's leads are connected directly
to the target conductor or tracing wire, and a suitable
ground.
Inductive Clamp (optional) – The jaws of the inductive
clamp encircle the target conductor; there is no metal-to-
metal contact.
Inductive (internal coils) – The transmitter is placed over
and in-line with the utility. Its internal coils generate a field
which induces current in the underground target conductor.
DANGER! Always connect leads before turning
the transmitter on to avoid electrical shock. Ensure
transmitter is well grounded.
Direct Connect Method
1. Attach the ST-510 line transmitter to
the ground and to the target line.
Insert the ground spike into the ground. Connect one of the
cable leads to the grounding spike.
Figure 8: Attaching Lead to Ground Stake
2. Connect the other lead to the target
conductor.
Figure 9: Example of Connecting to a Gas Line
Figure 10: Alternative Connection to a Pipeline
Ridge Tool Company
SeekTech ST-510
®
Tools For The Professional
TM