Storage; Faults - Nordforest JM-3200 Bedienungsanleitung

Storage

50 Nordforest 800, 1600 and 3200 kg cable winch
The manufacturing company rejects all responsibility for any
i
personal injury or material damage that is caused by reusing
device parts, where these are used for any purpose other than
the original material purpose.
The Nordforest cable winch and its spare parts may not be disposed
of with regular household waste.
›
Only hand over the components of the device to certified recycling
centres.
›
Observe the nationally applicable regulations.
Storage
›
Only store the cable winch and its accessories in closed rooms.
›
Ensure that the storage room is well ventilated and dry.
›
Use the original packaging for the cable winch. If you temporarily
store the cable winch in its original packaging, protect it from
damage due to dirt, dust or moisture.

Faults

If you are not able to repair the Nordforest cable winch yourself, contact
your dealer or an authorised repair workshop.
Before you contact your dealer, an authorised repair
i
workshop or the manufacturer, please note the specifications
and the device number on the type plate. These details are
required to rectify the problem or order spares.
The possible faults, causes and remedies are listed in the table below.
The safety regulations must be observed when performing all
maintenance work.
Document number | 09.2017