Nordforest JM-3200 Bedienungsanleitung Seite 43

Document number | 09.2017
›
Place the wire rope on the tip of the housing so that the rope guide
sleeve is aligned upwards.
To unlock the clamping jaws:
›
Press the T-handle towards the "Reverse gear" lever.
The clamping jaws are unlocked when an audible click is heard.
›
Guide the wire rope with the pointed side into the rope guide sleeve
on the cable winch and push it all the way through.
›
Pull the wire rope to the required length.
To lock the clamping jaws:
›
Press the T-handle towards the rope guide sleeve.
The clamping jaws grasp the wire rope. The wire rope is affixed
in the clamping mechanism and cannot be moved forwards
or backwards.
Nordforest 800, 1600 and 3200 kg cable winch
Operating the cable winch
43