Before Use - Taurus SUCCO EASY PTJBF500 Gebrauchsanweisung

H Turbo Function
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE

BEFORE USE:

- Make sure that all products' packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
USE:
- Unroll the cable completely before plugging it in.
- Ensure the blade set is fixed properly to the jar
(by turning counter clockwise) before putting on
the motor body. (Fig. 1).
- Place the jar onto to the motor unit; turn clock-
wise until the lock clicks into place. (Fig. 2).
- Put the ingredients, after having first chopped
them into small piece, into the jar with liquid (do
not exceed the maximum marker).
- Put the lid on the jar until you hear the click;
make sure it is properly fixed in place.
- Put the measuring cup in the lid.
- Connect the appliance to the mains.
- Start the appliance by operating the speed
control knob.
- To avoid a fierce, start up of the appliance, it is
advisable to start off from the lowest speed po-
sition "1" and, once the fan has been switched
on, and progressively once the unit has started,
increase the power to "2".
- If you wish to add more ingredients pull out the
measuring cup.
- Add the ingredients and replace the measuring
cup.
- To stop the appliance set the speed back to "0".
- Serve the drink through the grate on the lid, that
will filter the mixture.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
by using the speed regulator control (G). This
function is very useful, as it makes it possible to
adapt the speed of the appliance to the type of
work that needs to be done.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance, selecting position 0 on the
selector control.
- Unplug the appliance from the mains.
- Turn the mixing jar anticlockwise and remove it
from the motor body.
- Lift the jar from the motor body.
- Clean the appliance.
"PULSE" FUNCTION
- The appliance works in highest speed to
achieve optimal performance.
- Select the option "P" in the speed knob to
operate and release the button when you wish
to stop operating.
- We recommend working in cycles of 3 seconds
and repeating the operation until you obtain the
desired result.
SAFETY THERMAL PROTECTOR:
- The appliance has a safety device, which pro-
tects the appliance from overheating.
- If the device disconnects itself and does not
reconnect, unplug it from the network and con-
tact one of the authorized technical assistance
services.
CLEANING
- Disconnect the appliance from the mains and
allow it to cool before undertaking any cleaning
task.
- Clean the equipment with a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not let water or any other liquid get into the
air vents to avoid damage to the inner parts of
the appliance.
- Never submerge the appliance in water or any
other liquid or place it under running water.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- The following pieces may be washed in a dish-
washer (using a soft cleaning program):
- Jug.
- Lid.
- Measuring cup
- The draining/drying position of the articles