Phocos CIS-CU Bedienungsanleitung Seite 23

Dusk to Dawn mode

D2D means Dusk to Dawn mode. (Rotary switch 6 and 9)
Standard controller mode (Morning h and Evening h OFF)

Switch off both morning and evening hours to activate standard
controller mode. Loads are always on if no load disconnect event
(LVD/SOC, over current) happens.
Load Control Function (Single Load Controller)
Timer Reference
Evening (h)
Morning (h)
SOC LVD (V)
Dimming (%)
Load Dimming
1 2
5 8
6 9
7 10
N/A 11
21
Hours based on middle of
night or dusk and dawn
1-15 hours
1-14 hours and D2D (Dusk
to Dawn) mode
State of charge (SOC) and
voltage controlled (LVD)
Dimming values (0-100%,
step 10%)