Adjusting the height of the push handles
-
Release the handle locking knob,
-
Make adjustments to your desired height.
-
Tighten the knob.
Both push handles should be adjusted to the same height.
The correctly adjusted handles should be to the height of the user's hips.
Never leave the device without the breaks engaged.
Using the hand brakes
-
TO STOP THE ROLLATOR simply pull the brake handles up towards the hand grips.
TO REMAIN STATIONARY hold the brake handles in the "UP" position.
-
-
TO START MOVING release the brake handles. They will drop down automatically and the brakes
will be released.
You should always engage the breaks when you don't plan to move the device.
Never leave the device without the breaks engaged when there is someone sitting in it!
Never leave the device on slopes without the breaks engaged!
Locking/Unlocking the hand brakes and sitting on the rollator
To lock the brakes push the brake handles down until you can hear the "click" sound.
-
-
You can turn around and sit on the rollator.
-
After standing up turn around to the rollator again.
-
To unlock the brakes pull the brake handles up until you feel them loosen.
When using the rollator in a stationary position, the hand brakes MUST always be locked.
When sitting on the rollator don't sit too much to the front of the rollator. You should NOT sit (partly)
above the shopping bag
Always sit right up while resting your forearms or hands on the push handles.
NEVER lean backwards when sitting on the rollator.
7
Cleaning
General:
Clean the device regularly and keep it clean.
Lighter dirt and dust can be removed with a wet cloth.
Larger parts of dirt can be removed with a non-corroding, mild washing agent and warm water.
Do not use harsh abrasives or bleach based cleaners, as this may cause damage or discolouration.
Dry parts with a soft cloth.
Wheels:
Clean wheels with warm water and a mild cleanser. Dry with a clean rag.
Lubricate with multi purpose oil periodically or if wheels begin to squeak.
Issue 11 / 2014
5/20
Router