Blaupunkt SJV801 Bedienungsanleitung Seite 8

SJV801
wet pulp). Allow parts to dry.
After disassembling the unit all removable parts may be washed in hot soapy water.
The lid, bowl, pulp container, juice cup are dishwasher safe.
Wipe the motor base with a damp cloth.
Always treat the filter (3) with care as it can be easily damaged.
If pulp is left to dry on the filter it may clog the fine pores of the filter mesh thereby lessening the
effectiveness of the juicer.
HOW TO USE THE FOOD PROCESSOR ACCESSORY
Assembly:
1. Fit the food processor base (13e) onto the body of the device.
2. Insert the food processor internal chamber (13d) into the food processor base (13e).
3. Place the collector (13c) onto the pin, with the oval part at the base and the multi-wall part at the
top.
4. Place the blade disc (13b) onto the collector (13c). With the double-sided disc, the upper surface
will be the working surface.
5. Close the food processor with the lid (13a) and turn the lid until it clicks into place.
Use:
1. Fold the accessory. Connect the device to the power supply. Turn on the device with the power
switch.
2. Vegetables or fruit should be gently inserted through the feeder opening in the lid. Do not put
fingers or any tools or cutlery inside the feeder. Push only using the attached pusher (13f ).
3. Switch off the device and disconnect it from the power supply when you have finished using it.
Warning: Only change the blades when the machine is switched off and disconnected from the power
supply.
Warning: Rinse the base of the food processor only under running water. Do not immerse the part in
water or wash it in a dishwasher.
HOW TO USE THE ICE-CREAM-DESSERTS ACCESSORY
Assembly:
1. Place the ice-cream-desserts accessory bowl (12) onto the body of the device.
2. Insert the screw (4) into the bowl.
3. Close the bowl using the lid (5).
Use:
1. Fold the accessory. Connect the device to the power supply. Turn on the device with the power
switch.
2. Small, fragmented particles of frozen fruit should be gently inserted through the feeder opening
in the lid. Do not put fingers or any tools or cutlery inside the feeder. Push only using the
attached pusher.
3. Switch off the device and disconnect it from the power supply when you have finished using it.
6