Adjustment Of Seat Cushion Tilt Angle (Optional Function); Adjustment Of The Arm Rests - akrus SC 500 Gebrauchsanweisung

5.2.1. Adjustment of seat cushion tilt angle (optional function)

The movement of the seat cushion is synchronized to the reclining backrest.
To select "Horizontal" or "Tilt" (approx. 12°) just turn the "Selector Wheel" right
or left underneath the seat to the desired position.
Seat cushion horizontal
NOTE
To change the setting of the seat cushion from horizontal to tilt, the back rest
must be in a fully vertical position.

5.2.2. Adjustment of the arm rests

The armrests feature a number of articulated joints for individual adjustment of
armrests to each patient.
Use attachment block to position armrest on the side rail at the desired posi-
tion. To adjust the height of, or pivot the armrest, use any of the two clamp
joints. The ball head allows adjustments with multiple degrees of freedom.
Attachment block
Clamp joint for height adjust-
ment
Clamp joint for pivoting
and swivel
Make sure, the tips of the armrests will not collide with the side rails when moving
the backrest to a fully vertical position.
241g001e_SC 500
Control Lever
01. Jan 2007
Seat cushion tilted
approx. 12°
Page 13 of 19