Technical Data - DERMAVIT Diamond Shield IE Zapper Bedienungsanleitung

Technical Data

General
• Operating temperature: +15° C to +30° C
• Storage temperature: -20° C to + 70° C
• Power supply: 9V alkaline (manganese) battery or comparable accumu-
lator.
Connections
• 3.5 mm socket (stereo) for grounding plug
• 3.5 mm socket (stereo) for signal outputs
• Chip card slot
Characteristic of the output signals
• Frequency range 0.5Hz - 2,5 MHz
• Waveform: square wave signal
• Minimum accuracy of the frequencies: 100 ppm
• Output Voltage: 0.1 - 16V (measured from the 0V line
• Offset: No offset, positive offset, positive offset + 0.3V
• Modulation up to 254 times the output frequency (but 2,5 MHz must not
be exceeded)
• Wobble (maximum up to twice the fundamental frequency)
• Voltage control to keep the output current constant (only at frequencies
above 20Hz)
• Internal resistance: 1 kOhm
Diamond Shield
Instruction Manual
page 42