Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Bringing into service
Insert the battery
1. Open the battery compartment cover on the back of the device.
2. Insert the supplied battery. Please keep in mind that the battery has to be
inserted correctly. Meaning the plus has to go to plus and minus to minus.
(If however the battery is inserted incorrectly, the device will not be dama-
ged by that.)
We recommend using alkaline batteries or rechargeable batteries.
Connecting the cables
1. Connect the connection cable for the bracelet electrodes in the right so-
cket (above LED).
2. Connect the bracelets.
3. If you want to work with grounding: Connect the grounding cable to the
left socket. Then connect the ground wire to the outlet.
Operation
Switch On
Pressing briefly the „Power" button will turn on the device.
Switch Off
Press the „Power" button and hold it for about 1 second until the device is turned
off.
Automatic Switch Off
After 12 Minutes without user or program activity the device switches off auto-
matically to save battery power.
Diamond Shield
Instruction Manual
page 36
Quicklinks ausblenden:
Werbung
Kapitel
Inhaltsverzeichnis
