Keypad Lock; Menu Navigation - DERMAVIT Diamond Shield IE Zapper Bedienungsanleitung

Charge condition of the battery
The state of charge of the battery is displayed on the LED. If the device is swit-
ched on, the LED flashes. When the battery is full, the flashing frequency is slow.
When the battery is empty the flashing frequency is faster.
If the battery is empty, a message appears, and the device can no longer be used.

Keypad lock

The device has a keypad lock to prevent accidental operation of buttons. To
avtivate or deactivate the keypad lock briefly press the POWER-button and then
press OK. The device will display the status of the keypad lock then.
Activate / deactivate the loudspeaker
Press the sound button to switch the loudspeaker on or off. The current state is
then displayed briefly.

Menu Navigation

Navigation through the menu structure of the Diamond Shield is simple and iden-
tical for all functional areas:
• The currently selected item is marked with a small black rectangle. Use
the up arrow key („+") to select the next higher element and the down
(„-") arrow key to select the underlying. If you have already selected the
last item of the menu and press the down arrow key, the first entry in the
menu is selected. Accordingly, the system jumps to the last entry, if you
press the up arrow key when the first entry is already selected. This al-
lows you to switch quickly between the first and the last entry.
• A scroll bar on the right edge display appears when the current list has
more entries than can be displayed. The scroll bar then indicates where
you are in the list.
• Confirm your selection with the OK button. Then a new display appears
that corresponds to the selected item.
• Press the EXIT key to return one level back (if you are not already in the-
main menu).
Diamond Shield
Instruction Manual
page 37