Security Code - Silvercrest SDT 1.7 A1 Bedienungsanleitung Und Serviceinformationen

SilverCrest SDT 1.7 A1
Press the  or  directional control buttons [4] to select the desired mode. To save the selected
setting, press the Phonebook button [3].
Answer Delay
Here you can set how many times the telephone should ring before the answering machine picks-up
the call. You can set between 2 and 9 rings or use the "Toll Saver" setting.
In toll saver mode the answering machine will answer after 5 rings if no new messages had been
recorded. If new messages exist, it will answer after the second ring.
This setting is useful if you want to listen to the answering machine messages when you are absent.
If it takes more than 2 rings, there are no new messages and you can dial off before the answering
machine answers the call.

Security Code

To edit the security code for the remote listening function, proceed as follows:

First enter the old 3-digit PIN (default 000).

Press the Phonebook button [3] to confirm your entry.

Enter the new 3-digit code.

Press the Phonebook button [3] to confirm your entry.

Re-enter the new code to confirm and then use the Phonebook button [3] to apply.

A beep will sound after the input has been completed.

Please make sure you remember the new code or keep it in a safe place.
You will need this code for remote listening to the messages left on the answering
machine.
Language
This lets you select the answering machine language. Press the  or  directional control buttons
[4] to select the desired language. To save the selected setting, press the Phonebook button [3].
If you use one of the pre-recorded outgoing messages, its language will also be changed
accordingly.
164 - English