Idrac Settings Utility; Device Settings (Geräteeinstellungen); Dell Lifecycle Controller; Embedded System Management - Dell EMC PowerEdge MX740c Installations- Und Servicehandbuch

Option Description
System Date Enables you to set the date on the system.
Asset Tag Specifies the asset tag and enables you to modify it for security and tracking purposes.
Keyboard Enables you to set whether the system boots with the NumLock enabled or disabled. This option is set to On by
NumLock default.
F1/F2 Prompt on Enables or disables the F1/F2 prompt on error. This option is set to Enabled by default. The F1/F2 prompt also
Error includes keyboard errors.
Load Legacy Video Enables you to determine whether the system BIOS loads the legacy video (INT 10H) option ROM from the video
Option ROM controller. Selecting Enabled if the operating system does not support UEFI video output standards. This field is
available only for UEFI boot mode. You cannot set the option to Enabled if UEFI Secure Boot mode is enabled.
This option is set to Disabled by default.
Dell Wyse Enables or disables the Dell Wyse P25/P45 BIOS Access. This option is set to Enabled by default.
P25/P45 BIOS
Access
Power Cycle Enables or disables the Power Cycle Request. This option is set to None by default.
Request

iDRAC Settings utility

The iDRAC settings utility is an interface to set up and configure the iDRAC parameters by using UEFI. You can enable or disable various
iDRAC parameters by using the iDRAC settings utility.
ANMERKUNG: Accessing some of the features on the iDRAC settings utility needs the iDRAC Enterprise License
upgrade.
For more information about using iDRAC, see Dell Integrated Dell Remote Access Controller User's Guide at www.dell.com/idracmanuals.
Device Settings (Geräteeinstellungen)
Geräteeinstellungen ermöglicht Ihnen die Geräteparameter zu konfigurieren.

Dell Lifecycle Controller

Dell Lifecycle Controller (LC) bietet erweiterte integrierte Systemverwaltungsfunktionen wie Systembereitstellung, Konfiguration,
Aktualisierung, Wartung und Diagnose. LC ist Bestandteil der bandexternen iDRAC-Lösung und der systemintegrierten Dell Unified
Extensible Firmware Interface (UEFI)-Anwendungen.

Embedded System Management

The Dell Lifecycle Controller provides advanced embedded system management throughout the system's lifecycle. The Dell Lifecycle
Controller can be started during the boot sequence and can function independently of the operating system.
ANMERKUNG: Certain platform configurations may not support the full set of features provided by the Dell Lifecycle
Controller.
For more information about setting up the Dell Lifecycle Controller, configuring hardware and firmware, and deploying the operating
system, see the Dell Lifecycle Controller documentation at www.dell.com/idracmanuals.

Start-Manager

Mit dem Bildschirm Boot Manager (Start-Manager) können Sie die Startoptionen und Diagnose-Dienstprogramme auswählen.
ANMERKUNG: This option does not apply to 84-key keyboards.
Vor-Betriebssystem-Verwaltungsanwendungen 39