Environmental Concerns - Electrolux EUT10001W Benutzerinformation

46 electrolux
6. Slot the hinge pin into the hole in the
hinge plate.
7. Take the door off.
8. Refit the upper hinge pin into the oppo-
site location.
9. Fit the door in place on the hinge pin.
10. Slot the hinge pin into the hole in the
hinge plate and relocate the hinge as-
sembly to the opposite location and refit
using the retaining screws.
11. Refit the bottom hinge plate assembly on
the opposite side, taking care that the
edge of the door is parallel with the side
of the cabinet.
12. Remove and install the handle
opposite side.

Environmental concerns

The symbol on the product or on its
packaging indicates that this product may
16) If foreseen
13. Reposition, level the appliance, wait for
at least four hours and then connect it to
the power socket.
Do a final check to make sure that:
• All screws are tightened.
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in Win-
ter), the gasket may not fit perfectly to the
cabinet. In that case, wait for the natural fit-
ting of the gasket.
In case you do not want to carry out the
above mentioned operations, contact the
nearest After Sales Service Force. The After
Sales Service specialist will carry out the re-
versibility of the doors at your cost.
Electrical connection
Before plugging in, ensure that the voltage
and frequency shown on the rating plate cor-
respond to your domestic power supply.
The appliance must be earthed. The power
supply cable plug is provided with a contact
for this purpose. If the domestic power sup-
ply socket is not earthed, connect the appli-
ance to a separate earth in compliance with
current regulations, consulting a qualified
electrician.
The manufacturer declines all responsibility if
the above safety precautions are not ob-
served.
This appliance complies with the E.E.C. Di-
rectives.
16)
on the
not be treated as household waste. Instead
it should be taken to the appropriate
collection point for the recycling of electrical