INSTALLATION
•
Carefully remove the unit from its
packaging and all packaging materials
from the unit.
•
Unwind the power cord and unplug it to its
full length.
•
Unwind the FM cable antenna completely
and pull it out to the full length.
•
Place the device on a flat and stable
surface close to a wall outlet and away
from strong magnetic fields.
•
Plug the power plug into the wall outlet.
•
Lift the turntable cover. The turntable has
been provided with a transport lock for
shipping. To remove the transport lock,
use a coin or screwdriver and unscrew the
transport lock clockwise. This may cause
the platter to rotate.
•
Remove the white plastic guard from the
needle by sliding it down in the direction
of the arrow.
•
Be careful not to damage the needle
during use, as this is not covered by the
warranty.
•
Remove the tonearm fuse.
•
Release the tonearm locking lever.
•
Plug the power plug into an 230 V ~ 50 Hz
outlet.
Transport screw
Tone arm
lock lever
Stylus cover
EN
31