6. Configuration software WIKAsoft-TT
6. Configuration software WIKAsoft-TT
For installation please follow the instructions of the installation routine.
EN
6.1
Starting the software
Start the configuration software by double-clicking on the WIKAsoft-TT icon.
After starting the software, the language
can be changed, via the selection of the
appropriate country's flag.
The selection of the COM port is made
automatically.
After the connection of a transmitter (using the
PU-448), on pressing the "Start" button, the
configuration interface is loaded.
The configuration interface can only be loaded when an instrument is
connected.
22
WIKA operating instructions model T15