Fitting The Filter Cover - Gaggenau AC250121 Gebrauchs- Und Montageanleitung

Installation
en
4 Turn the fan box into the correct position according
to the installation situation.
5 Push the fan box to the side and connect the power
supply.
6 Push the fan box to the other side and connect the
ducting.
7 Position the fan box in the centre and screw it firmly
in place.
8 Connect the cable.
9 Press together the cable duct at the sides, attach
and click into place.
50

Fitting the filter cover

m
Warning – Risk of injury!
Components inside the appliance may have sharp
edges. Wear protective gloves.
m
Warning – Risk of injury!
Risk of trapping body parts when opening and closing
the hinges. Keep your hands away from the hinges.
1 Open the hinges on the filter cover.
2 Mount the filter cover on the designated screws and
push it backwards/forwards depending on the key
hole opening into the narrow section.
3 Tighten the fastening screws of the hinges.
4 Insert the metal grease filter.
5 Swing the filter cover up and ensure that it
engages.