roco 10738 Handbuch Seite 8

@])
8
Depress STOP and GO key simultaneously until a rPset is initiated
STOP key to disconnect track power
input address 80
Depress Direction reversing constantly, then ad(lltionally Go for min. 0.5 sec. to reconnect
trackpower
Decoder is in programming mode = flashing of the locomotive lights: · · · · · ·
input of the register to be changed (2 digits) (Two-fiq rre in the address field)
Press Direction Reversing to confirm =double flashi nq: .. .. _ ..
~·_ :..:__:_:
____ .
input selected value (Two-figure in the address field)
Press Direction Reversing to confirm = short continuous light, then double flashing: - - ·· ·· ··
STOP key
GO key
Programming lnstructions for the Uhlenbrock lntellibox®
Although you use your locomotive with
Motorola * * format it is usefull to select the
DCC format
II
CV-Programming-bytewise
II
for
programming (you can use the decoder with
Motorola**- and DCC format; please refer
to to operating instructions of the lntellibox).
And then ...
pul rhe locomotive on the programming track
CV I Registre
I
default
settin
01 03
----
02 03
03
04
04 03
05 63
06 25
08 151
49
117
54 16
55 03
56
I
03
seit•, the respected CV value (see the following Iist)
l-•
key
inp11 ' .elected value
depl l'SS the
g
key to confirm (programming of the value)
prp•, ng menu and in series the mode key to continue
driv' operation
use
bandwith of possible
chan es
locomotive address 01 - 80/127
minimum speed 01 -64
time of acceleration 01 -64
time of braking 01-64
maximum speed 01 - 64
median speed
01-64
Manufacturer's iden t fiCation or 08
returntodefault sell rngs
I
Ioad regulation
17 = on /16 = off
- - -
dimmer long aux 1, Ju< 2 01-64
analoge mode 00 = all off, 01 =AC mode on,
02 = DC -mode on, 03 = all on
- - -
I
Märklin * brake mod• 01,03 = on
02, 04
=
off
{Märklin*)
00, 02, 04 = off
{lntellibox)
* Märklin is the registered trademark of Gebr. Märklin & Cie. GmbH, Göppil lli''"
**
Motorola is the regi stered trademark of Motorola lnc., Tempe-Phoeni x/1\!1 .1111.1 (USA)