Operating Instructions; Technical Specifications; Supplied Components - Flex ALC 311 Bedienungsanleitung

Technical specifications

Order number
Precision
Self-levelling range
(horizontal)
Operating range (Ø)
Length of the laser line at
distance of 3 m
Operating duration (batteries) 15 h
Visible laser diode
Laser class
Weight (ALC with batteries)
* depending on the ambient light

Supplied components

Line laser ALC 311 including batteries
(3x AA)
Wall and tripod bracket for ALC
Laser visibility glasses
Magnetic crosshairs
Transportation case

Operating instructions

Before switching on the
power tool
Unpack the power tool and check that the
delivery is complete and not damaged.
Before using the machine for the first time,
insert batteries.
14
Mains mode
The machine can be used with a standard
power supply unit (4.5 V d.c., 2.5 mm jack
311.286
plug).
±3 mm/10 m
Connect the power supply unit to the socket
(10).
±3,5°
Using batteries in the power tool
20 m*
~ 5 m
If one of the LEDs (2, 3, 6) flashes,
replace the complete battery set.
Required batteries:
– 3 x type AA / 1,5 V
3 x 635 nm
n Open the battery compartment (11)
2M
n Insert the batteries the correct way
1.95 kg
n Close the battery compartment.
Wall and tripod bracket
For optimum results it is recommended to
attach the machine to a tripod (accessory).
n Tripod thread: 5/8"
The wall and tripod bracket can be attached
to a wall with the elongated holes.
Note
on the machine.
round.
Note
Line laser