auna multimedia MVD-180 Handbuch Seite 44

Touch the RADIO ICON in main menu to enter the RADIO mode:
Selecting The Frequency Band
Touch the BAND icon to select the band. The display
will show in turn: (FM1, FM2, FM3, MW1 und MW2).
When an FM stereo broadcast is hard to receive,
press ST/MO button on the remote control to select
the MONO or STEREO mode. (When Stereo mode is
activated, the ST symbol will appear.)
Tuning in a station
In radio mode, touch UP (arrow up) to increase fre-
quency by one step of channel spacing.
Touch DOWN (arrow) to decrease frequency by one
step of channel spacing.
For an automatic station scan, touch and hold (for
more than 2 seconds) these ICONS to start search for
a radio station automatically.
To tune in strong-singnal FM Station only (LO/DX
function)
In radio model,Longer press the sel then rotate the
VOL knob to choose
knob repeatedly to select LOC/DX, between the LOC
and DX mode of Local and Long-distance traffic news.
Storing, Recalling and Listening to a Memory Station
• Store station in memory
• Select the frequency band
• Select the station
• Keep the desired memory key pressed in until the station is heard again after a brief interruption
• To retrieve a preset station,
• touch the 1-6 ranges briefly to retrieve a station which had been stored in the memory in advance
the chose number is shown on display.
44
Usage
Radio