Werbung
Thermostatic
Adjustment
Temperature
Limitation
The temperature is limited by the safety stop to 40°C. If
a higher temperature is required, it is possible to over ride
the safety stop by depressing the safety button.
NB. It is recommended that for private
domestic use
the maximum mixed water temperature be set at the fol-
lowing factory set values:
Shower Mixer 43°C
Bath/Shower 43°C
Temperatures can be set by following the procedures on
page 9. This ensures that after correct installation the outlet
temperature of the water can never exceed 43°C.
www.hansgrohe.com/
cleaning-recommendation
DE Reinigungsempfehlung / Garantie / Kontakt
EN Cleaning recommendation / Warranty / Contact
20
Hansgrohe · Auestraße 5 - 9 · D-77761 Schiltach · Telefon +49 (0) 78 36/51-1282 · Telefax +49 (0) 7836/511440
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
E-Mail: info@hansgrohe.com · Internet: www.hansgrohe.com
To guarantee a smooth running of the thermostatic element,
it is necessary from time to time to turn the thermostat from
total hot to total cold. The thermostatic mixer valve should
be checked annually by a qualified person to ensure
correct operation.
The mixer is fitted with check valves (page 14 pos.
96644000) and filters (page 14 pos. A and 96922000).
If the water flow drops the filters need to be cleaned. For
that purpose please follow the steps 1 - 8 on page 10.
Calibrating
Thermostat
If the temperature reading is different to the showering
temperature, follow the steps 1 - 6 on page 8.
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
www.hansgrohe.com/
cleaning-recommendation
Werbung
