Electrical Connection - Beem Pro Multi-Grill 3 in 1 Typ B9.001 Bedienungsanleitung

Setting up and connection

Electrical connection

EN
44
For safe and trouble-free operation of the appliance, the following
instructions have to be observed for the electrical connection:
Before connecting the appliance, compare the connection data
■
(voltage and frequency) on the rating plate with those of your
mains power supply. The data have to correspond in order to
avoid damage to the appliance. If in doubt, ask your electrical
appliance retailer.
The mains socket must be protected by at least a 10 A circuit
■
breaker.
Ensure that the connecting cable is undamaged and is not laid
■
over hot surfaces or sharp edges.
The connecting cable must not be strained, bent or come into
■
contact with the hot appliance.
Place the cable in such a way as to avoid danger from tripping.
■
If the appliance is to be connected to the power supply via an
■
extension lead, the cable cross-section must be at least 1.5 mm².
The electrical safety of the appliance is only assured when it is
■
connected to a properly installed protective earth (PE) conduc-
tor system. Connection to a plug socket without PE conductor is
forbidden. If in doubt, have the house installation checked by a
qualified electrician.
The manufacturer assumes no liability for injury or damage
caused by a missing or interrupted protective earth conductor.
BEEM - Elements of Lifestyle