Disposal Of The Packaging; Requirements For The Place Of Use - Beem Pro Multi-Grill 3 in 1 Typ B9.001 Bedienungsanleitung

Disposal of the packaging

The packaging protects the appliance from transport damage.
The packaging material was chosen in consideration of the
aspects of environmental friendliness and disposal technology
involved, and thus is recyclable.
Recycling the packaging material for further use allows to save
raw materials and reduces the waste generation. When no longer
required, dispose of the packaging materials in accordance with
the local regulations in force.
NOTE
If possible, keep the original packaging during the warranty
►
period in order to be able to pack the device properly in the
event of a warranty claim. Transport damage will lead to a
void warranty.

requirements for the place of use

For safe and trouble-free operation of the appliance, the installa-
tion location has to satisfy the following requirements:
Place the appliance on a level, heat resistant surface that is
■
also resistant to splashing fat.
The surface finishes on furniture may contain constituents
■
that can be detrimental to the rubber feet of the appliance. If
necessary, place a mat under the feet of the appliance.
Do not place the appliance in a hot, wet or very humid envi-
■
ronment or in the vicinity of inflammable materials. There must
be a gap of at least 15 cm between the appliance and any
walls, furniture or other objects.
Because of hot surfaces, the appliance must be placed at a
■
location which is out of the reach of children.
The mains socket must be easily accessible so that the plug
■
can be quickly pulled out in an emergency.
BEEM - Elements of Lifestyle
Setting up and connection
EN
43