Programming The Timer And The Activation Method For "Output 2; Function Settings - BASETech 1833947 Bedienungsanleitung

Example delete user code using user number:
53 894
10.10 Programming the Timer and the Activation Method for
"OUTPUT 2"
To carry out this programming step the code lock should now be in programming
mode (see Chapter "10.1 Entering Programming Mode").
You can programme whether the relay output 2 "OUTPUT 2" (F) is activated only for a specific
period of time (01-99 seconds) or whether it should be blocked.
a) To assign an activation time for activation of the relay output 2 "OUTPUT 2" (F) enter
the following key combination:
60 Time in seconds (you can programme from 01 to
99 seconds)
Example for 86 second activation time:
60 86 #
The factory setting is a 3 second activation time.
b) To block the relay output 2 "OUTPUT 2" (F) enter the following key combination:
61 #

10.11 Function Settings

To carry out this programming step the code lock should now be in programming
mode (see Chapter "10.1 Entering Programming Mode").
a) Setting Input Method:
You can determine which input method should activate the relay outputs.
Two input methods are available.
Input Method 1:
User code
Input Method 2:
User code
#
#
#
47