Gaggenau RC282 Gebrauchsanleitung Seite 31

Manual connection with home network (WLAN)
If the WLAN router does not have a WPS function or if
this is unknown, you can connect the refrigerator to the
home network manually.
·
1 Press button.
Temperature display shows Cn.
Press Û button until temperature display
2
shows SA.
3 Press + button.
The appliance is ready for manual connection.
The temperature display shows an animation.
The appliance is ready for manual connection for as
long as the animation is displayed.
4 The refrigerator has now set up its own
WLAN network with the network
name HomeConnect.
You can now access this network with your mobile
device.
5 Call up the WLAN settings in the settings menu of
the mobile device.
6 Connect the mobile device to the
WLAN network HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to establish the
connection.
7 After successfully connecting, open the Home
Connect app on the mobile device.
The app will search for the refrigerator.
8 As soon as the refrigerator has been found, enter
the network name (SSID) and the password (Key) of
your own home network (WLAN) in the
corresponding fields.
9 Confirm with Transmit to domestic
appliances button.
– If connection is successful, On flashes in the
temperature display.
You can now connect the refrigerator to the app.
– If the temperature display shows OF, no
connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting the refrigerator to the
Home Connect app
·
1 Press button.
The temperature display shows Cn.
Press Û button until the temperature display
2
shows PA.
3 Press + button to connect the appliance to the app.
The temperature display shows an animation.
As soon as the refrigerator and the app are
connected, the temperature display shows On.
4 Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not automatically displayed,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
5 Follow the instructions in the app until the process
is complete.
The temperature display shows PA.
The refrigerator has been connected to the app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If Er appears in the temperature display, reset the
Home Connect settings.
Note: On resetting, all Home Connect settings are
reset.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home
Connect settings can be reset:
·
1 Press button.
Temperature display shows Cn.
Press Û button until temperature display shows rE.
2
3 Press + button.
Temperature display shows an animation for
15 seconds.
The temperature display then shows On.
The Home Connect settings have been reset.
Home Connect
en
31