Energy Saving Mode - Bosch Indego S+ 400 Originalbetriebsanleitung

24 | English
Symbol Meaning
Display with dialog screen
➐
➑ 1 2 3 Garden number (shown when more than
one garden map in the mower memory)
➒ Network signal present
Network signal absent
The display switches into sleep mode, if no input is made for
10 minutes.
Adding a further Garden/LawnArea
(see figure I)
To install the Indego to an additional lawn area, please follow
the instructions in the Installation Guide.
Separate lawn area with separate docking station (see
figure I, right): The mower can be used on up to three dif-
ferent lawns. For an additional lawn area, a separate docking
station (see figure A) and the necessary perimeter wire and
pegs are required. If a schedule or the Bosch "SmartMow-
ing" calendar function is selected, it will cut the grass of the
area it is in, within the time slots.
Switch off the mower when transporting it between the indi-
vidual lawn areas.
Note: software updates have to be carried out on the mower
in every docking station.
To ensure remembering which docking station belongs to
which garden, it is recommended to label the docking sta-
tions with the garden number and description when storing
them for winter.
Without separate docking station: It is possible to connect
the lawn areas by placing the perimeter wire between the
two lawn areas parallel to each other as close as possible
(see figure I, top left). The additional lawn area without
docking station is not recorded in the map memory and the
mower will not use the LogiCut cutting strategy in this lawn
area without the docking station. The maximum recommen-
ded lawn area without a docking station is 40 m
will mow until it runs out of battery and will need to be car-
ried back to the docking station for charging.
Mowing
Do not let children ride the mower.
u
Press the stop button on top of the mower before lift-
u
ing. Always lift the mower by its handle. (see figure F)
Make sure the cutting area is free of small animals such as
hedgehogs or tortoises.
After successful installation, you can begin mowing immedi-
ately by pressing "mow" on the free Bosch Smart Gardening
App. You could also set up a programmed schedule, using
the Bosch "SmartMowing" functionality, which can also
plan future cutting sessions based on when it is forecasted
to rain.
A manual "calendar" can also be set up according to your
specific needs.
F 016 L81 862 | (31.10.2018)
The mower must mow a lawn area 3 times completely (do 3
full cuts) to learn the lawn area. During the learning phase,
the visual result may not be optimal.
Approximate runtimes for complete garden coverage using
LogiCut are listed below. Please note that the runtimes will
vary depending on the lawn complexity and number of ob-
jects within the garden.
2
100 m
2
350 m
2
400 m
Set a schedule with frequent repetitions. This achieves good
mowing results, the battery charge lasts longer and you
avoid clippings on the lawn.
When the mower is mowing
In „manual" mode, the mower works until the lawn is
mowed. Mowing is interrupted only for charging the battery.
When the lawn area is mowed, the mower returns to the
docking station.
In the programmable „Calendar" mode or with the "Bosch
SmartMowing" calendar function, the mower operates con-
tinuously for a set period of time. Mowing is interrupted only
for charging the battery. If the lawn area is mowed before
the time period expires, the mower returns to the dock.
To stop mowing prematurely, press the Dock button in the
Bosch Smart Gardening App. You could also send the mower
back to the docking station by pressing the confirm button
on Indego *tick sign" ✓.

Energy saving mode

The mower reduces its energy consumption by automatically
switching off the power in the perimeter wire when it is not
mowing and not being charged.
To wake up the mower remotely from the energy saving
mode, press "Mow" in the Bosch Smart Gardening App.
When a Calendar or the Bosch "SmartMowing" functional-
ity becomes active, the wire signal will start up automatic-
2
. The mower
ally.
Mowing small lawn areas with "SpotMow"
SpotMow is intended for mowing small areas that require
special treatment without having to mow the whole lawn,
such as the area under a piece of garden furniture that has
been removed. The mower is positioned at the lower left
corner of the intended area to mow (see figure H). The final
mowed area depends on the lawn conditions; it will not ne-
cessarily be an exact square. After completion of "Spot-
Mow", follow the instructions on the screen.
Note: For safety reasons, "SpotMow" cannot be used outside
the perimeter wire.
Sensors
The mower is equipped with the following sensors:
– The lift-up sensor is activated when the mower is lifted.
– The rollover sensor detects when the mower tips over.
4 h
12 h
14 h
Bosch Power Tools