Lenze EMZ9371BC Betriebsanleitung Seite 100

7 Parameterisation 8200 vector/8200 motec
Menu structure
Main menu
No. Display
100
Submenus
No. Display
5.18 Torque−Ctrl 2
5.18.1 Torque setpt
5.18.2 f limit
5.18.3 Motor param
5.18.4 Motor ident
5.19 Torque−Ctrl 3
5.19.1 Torque setpt
5.19.2 f limit
5.19.3 Motor param
5.19.4 Motor ident
5.20 Torque−Ctrl 5
5.20.1 CAN managem
5.20.2 Torque setpt
5.20.3 f limit
5.20.4 Motor param
5.20.5 Motor ident
l
Description Description
Analog torque setpoint via analog
input 1 (AIN1)
Analog speed limitation via
analog input 2 (AIN2)
Torque setpoint configuration
Speed limitation configuration
Motor current control
configuration, motor monitoring
Identifying motor parameters
Torque setpoint via AIF process
data channel (AIF−IN.W1)
Speed limitation via maximum
frequency C0011
Torque setpoint configuration
Speed limitation configuration
Motor current control
configuration, motor monitoring
Identifying motor parameters
Operation with the system bus
(CAN) function module on FIF
Torque setpoint via process data
channel (CAN−IN1.W2)
Speed limitation via process data
channel (CAN−IN1.W3)
System bus (CAN)
communication set−up
Torque setpoint configuration
Speed limitation configuration
Motor current control
configuration, motor monitoring
Identifying motor parameters
EDK9371BC DE/EN/FR 3.2