Connect To A Bluetooth Device; Reconnect To Bluetooth Device; One-Touch Connection (Nfc) - Avantree BTHS-AS90 Bedienungsanleitung

• If you want to use the ANC function in wired mode, please power ON the headphones first.

Connect to a Bluetooth device

• Enter headphones into PAIRNG MODE - Slide the power switch to position and hold for 3s until the LED
flashes BLUE and RED alternately.
• On your mobile device – Turn on Bluetooth and select "Avantree AS90" to connect. If you are using a Bluetooth
transmitter, please enter your transmitter into PAIRING MODE (please refer to your transmitter's user manual).

Reconnect to Bluetooth device

Normally, once powered on, the headphones will reconnect to the last connected device automatically within
5-10 seconds.
If it doesn't, please slide the Power Switch to position ONCE ,
OR select "Avantree AS90" from your device to connect manually. (If you're using a Bluetooth transmitter, please
refer its user manual to reconnect)

One-touch connection (NFC)

3