Led Indications; Bluetooth Pairing; Reconnection - Avantree Aria Podio Schnellanleitung

LED indications

Working Status
Pairing Mode
Reconnecting
Disconnected
Connected with SBC Codec
Connected with AptX Codec
Connected with AptX-LL Codec
Connected with AptX-HD Codec
Low Battery

Bluetooth Pairing

Put the headphones into Pairing Mode (On 1st use, it will enter PAIRING MODE automatically once turned on.)
Pair to mobile device
Set the headphones into Pairing Mode as above. Activate Bluetooth on your phone and set it to search for new
devices. Select "Avantree AS90T", once successfully paired you'll hear "connected".
To add another cell phone
Connect with the FIRST phone as above, then turn off the headphones.
Connect headphones with SECOND phone as above. Tap and select "Avantree AS90T" on the FIRST phone
Now, Avantree Aria Podio connected with TWO phones simultaneously.

Reconnection

Normally, when the next time you turn on Avantree Aria Podio, it will automatically reconnect the last paired
device.
Alternatively, Slide the power switch to [ ] once
LED indicator
Blinks BLUE & RED alternately
Blinks BLUE once every 1s
Blinks BLUE once every 2s
Blinks BLUE once every 5s
Blinks BLUE twice every 5s
Remains BLUE
Blinks BLUE three times every 5s
Blinks RED once every 1min
then release to enter into its Reconnection Mode.
2