Repair By After-Sales Service; Transport And Storage; Returning Products - EFA 750 Originalbetriebsanleitung

Replacing the O-ring on the switch hous-
ing
Remove the 2 slotted head screws (9) at
•
the end of the handle and remove together
with the locking washers (10).
Remove the switch housing (11)
•
Replace the O-ring (12) on the handle
•
housing. Grease the new O-ring slightly
before installing it.
Replace the loosened cable clamps (13),
•
align the switch on the machine head and
fix the switch housing back in place with
the 2 slotted head screws and locking
washers.

6.3 Repair by After-Sales Service

Disconnect the machine from
the power adapter plug and
mains power outlet before all
starting any repair work!
BA-NR.: 001 580 472
Originalbetriebsanleitung
[Produktnummr]
Repairs may only be carried out by author-
ised specialists.
Our Service department is at your disposal
•
for all repair work. In the event of a repair,
please contact your nearest contract work-
shop or our parent company directly.
Please note that electric tools may only be
•
repaired by qualified electricians (accord-
ing to VBG 4), as incorrectly performed re-
pairs can result in considerable danger for
the user.
On request, spare parts lists can be sup-
•
plied to the repair workshop with qualified
specialist staff.
The gear must be checked following each
•
repair (disassembly) and greased as nec-
essary. Recommended grease:
EFA-Spezialfett
Art. No.: 001 365 641
Fig. 4

7 Transport and Storage

The machine must be stored in a dry, well-
ventilated room.
The machine must be cleaned as described in
Chapter 6.1.2 and transported in a dry condi-
tion.
Ensure that the machine is not damaged dur-
ing transport.

8 Returning Products

At the end of their useful service life, return old
machines to the parent company for disposal
17/24
DE-EN
Stand/Version
02/2014