Use Your Printer With Apc; Printing From Your Pc; Install The Software - Sagem PHOTO EASY 260 Bedienungsanleitung

Liasse AZUR_GB.book Page 25 Lundi, 23. mai 2005 8:43 08
8 U
SE YOUR PRINTER WITH A
P
RINTING FROM YOUR
Connecting a computer (PC)
Your kit includes an installation CD-ROM containing a printer driver, image
processing software.
Warning:
to avoid any print problems associated with the picture format, you are advised to
use the software supplied with the printer, or other image retouching software.
Make sure that your PC is compatible with the requirements as specified:
PC configuration required:
Pentium or equivalent,
OS: Windows 98 SE / 2000 / Me / XP,
128 MB DRAM or more,
150 MB available on hard disk,
USB port available.

Install the software

Insert the CD-ROM in the drive to start installation. A command window
appears. Follow the instructions displayed on the screen.
If the installation program does not start automatically, you can start it by
double-clicking on the "setup.exe" file located in the CD-ROM root
directory.
The photo software is installed in three steps: running the Install program,
restarting the computer, and performing the final printer installation.
Do not connect the printer to the PC before installing the printer driver. After
you have installed the software, a message will be displayed asking you to
restart the PC. After restarting you can connect the printer to the PC.
The CD-ROM contains an installation manual which includes detailed
operating instructions for the printer driver. Refer to this manual for further
information.
Remark: the B/W print option is not available in Windows 98.
PC
PC
- 25 -