Lanaform ABPM-100 Bedienungsanleitung Seite 7

for 5 minutes and do not talk or move during
the measuring process. If the symbol often ap-
pears, please consult a doctor. Self-diagnosis
and self-medication based on the results of the
measuring process can be dangerous. You must
follow your doctor's instructions.
Ranking measuring results
• The results of the measurement process are ranked
and evaluated according to the table below.
These values must only be used for information
purposes because blood pressure differs from
person to person and depending on their age, etc.
It is important to consult your doctor regularly.
Your doctor will provide you with your own values
for normal blood pressure and the level at which
blood pressure is regarded as dangerous.
The ranking is displayed as is the scale of the
device for establishing the range within which
blood pressure has been measured. If the systolic
and diastolic values are within two different
ranges (e.g. systolic within the "normal high"
range and diastolic within the "normal" range),
the scale markings for the chart will always give
the highest range on the device, i.e. "normal
high" in this example.
Range of blood Systolic
pressure values (in mmHg)
Level 3: ≥ 180
acute hypertension
Level 2: 160 – 179
intermediate
hypertension
Level 1: 140-159
mild hypertension
Normal high 130 - 139
Normal 120 - 129
Optimum <120
Source: WHO, 1999 (World Health Organisation)
Recovering and removing
measuring values
•
•
•
•
Diastolic Colour
(in mmHg) displayed
≥ 110 Red
•
100 - 109 Orange
90 - 99 Yellow
85 - 89 Green
80 - 84 Green
<80 Green
ABPM-100 EN Instruction manual
EN
The result of every successful measurement is
recorded with the date and time. When there
are more than 30 measuring data, the oldest
measurement is deleted.
Press the memory button to display the meas-
(3)
uring result. The number of results recorded for
the selected user is displayed.
Press the STOP/START button
other user and confirm by pressing the memory
button .
(3)
The average value (AL) of all the values meas-
(15)
ured and recorded for this user is then displayed.
If there is no result in the memory of the selected
user, the LCD screen displays "0" for blood pres-
sure and for the pulse measurement.
FR NL DE SL SV
to select an-
(2)
7
/ 74