Evaluating The Results - Lanaform ABPM-100 Bedienungsanleitung

EN
FR NL DE SL SV
Adjusting to
the correct position
• Rest for about 5 minutes before
taking any measurements. Oth-
erwise, this may cause errors.
• Measurements can only be taken when sitting
down or prone. Make sure in every case that the
cuff is at heart level.
• Make yourself comfortable before taking your
blood pressure. Make sure that your back and
your arms are well supported on the backrest
and armrests. Do not cross your legs. Put your
feet flat on the floor.
• In order not to distort the result, it is important
to remain calm when taking the measurements
and not to talk.
Measuring blood pressure
• Position the cuff as described above and get into
the position you want to take the measurements.
• To start the monitor, press the STOP/START button
. All displays will light up briefly.
(2)
• To choose the memory location you want, press
the memory function button
• The results of measuring 4 different people or
the morning and evening measurements may
be recorded separately in four memories with
30 places.
• The monitor automatically starts the measur-
ing process.
• You can stop the measuring process at any time by
pressing the STOP/START button
recognises a pulse, the Pulse symbol is displayed.
6
/ 74 ABPM-100 EN Instruction manual
• The results of measuring the systolic pressure
(10)
are displayed. The irregular heartbeat symbol
(if there is one)
measuring results
• Er_ is displayed when the measuring process
has not been carried out correctly. Read the
chapter Error message/Rectifying errors in
these instructions for use and start taking
measurements again.
• Switch off the monitor by pressing the STOP/
START button
recorded in the user memory you have chosen.
• If you forget to switch off the device, it will switch
off automatically after approximately 1 minute.
• Wait at least 5 minutes before taking another
measurement.

EVALUATING THE RESULTS

Irregular heart beat
• This device is able to identify any irregular heart
beat during the measuring process and displays
it, if necessary, after the measuring process with
. ( , , or ). the corresponding symbol
(3)
• This may indicate arrhythmia. Arrhythmia is
a disease characterised by an anomaly in the
heart rate due to disturbances in the bio-elec-
trical system. The symptoms (heart beats that
are late or early, faster or slower pulse) can be
caused particularly by heart disease, by age, by
natural predisposition, by a diet that is too rich,
. As soon as it by stress or even by lack of sleep. Only a medical
(2)
consultation can determine arrhythmia.
If the symbol is displayed after the measuring
process, start again. Make sure that you rest
, diastolic pressure and the pulse
(11)
and the symbol for ranking
(17)
flash.
(18)
. The measuring result is then
(2)
.
(17)
(12)