Scope Of Delivery/Parts List; Technical Data; Correct Use; Safety Notes - Zoofari 307211 Aufbauanleitung

Congratulations! Congratulations on purchasing
this high-quality product. Be sure to familiarise
yourself with the assembly instructions prior to
use.
Please take the time to carefully
read through the following
assembly instructions and safety
notes.
Only use the product as described and for the
intended use. Please retain these instructions for
future reference and ensure that they are passed
on to any third party.

Scope of delivery/Parts list

(Fig. A)
1 x Bottom plate (1)
1 x Large lying area (2)
1 x Small lying area (3)
1 x Cat's lair (4)
1 x Column with screw thread, 37cm (5)
3 x Column with screw thread, 35cm (6)
1 x Screw M8 x 30mm (7)
4 x Screw M8 x 40mm (8)
1 x Allen key (9)
1 x Instructions for use

Technical Data

Dimensions: approx. 60 x 80 x 39cm
(B x H x D)
Max. load capacity:
6kg
Date of manufacture (month/year):
01/2019

Correct use

The product is not intended for industrial use.
It serves as an indoor scratching tree for cats.

Safety notes

Important: Read these setting up
instructions attentively and keep them
carefully without fail!

Danger to life!

• Never leave children unattended with the
packaging material. There is a danger of
suffocation.
• The item is not intended for climbing or for use
as a toy. Ensure that nobody stands on it or
pulls themselves up on it, especially children.
The item can fall over.

Risk of injury!

• Before using the product, ensure proper stabil-
ity.
• Place the product on a plain, even surface
and not in the vicinity of stairs.
• Do not place any dangerous objects, such as
candles, on or near the product.
• Regularly examine the product for wear.
Regularly check all the threaded joints for
tightness. The item may only be used in impec-
cable condition.
The item may only be used for the purpose for
which it is intended.
• The maximum load capacity may not be
exceeded.

Assembly

1. Remove the packaging and place all the parts
of the product on the floor.
2. Screw the columns (5), (6), as shown in Fig. B,
to the cat's lair and the large lying area.
3. Completely assemble the product as shown in
Fig. C.
Important! Ensure firm fitting of the screws (7),
(8).
Note: To reduce the danger of tipping
over, the product can be stood with its
rear side against a wall.

Storage, Cleaning

Always store the item in a clean and dry
condition in a temperature-controlled area.
Only vacuum the product and do not clean it
with sharp cleaning implements.
GB 5