Weather Station - elv 10310 Bedienungsanleitung

4. RESET:
- Return all values to default value.
5. Battery compartment:
- Accommodates 2 AA size batteries.
6. Battery door
7. Wall mount holder:
- Supports the transmitter in wall mounting.
8. Folding table stand
BEFORE YOU BEGIN
TRANSMITTER:
1. Remove the removable stand, unscrew the screws of the back cover and lift the cover off.
2. Insert 2 x AA batteries into the battery compartment. Be sure to insert them the right way
round (see polarity information +/- in the battery compartment).
3. The receiver can receive humidity and temperature data from up to 3 transmitters.
Assign the channel to each transmitter, Channel 1, 2 or 3 respectively by sliding the
switch besides the battery compartment.
4. Press the reset key of the transmitter individually by a pin to confirm the channel setting.
5. Select the temperature unit by sliding the ºC / ºF switch besides the battery compartment.
6. Re-fix the battery door, and secure its screws evenly and diagonally.
NOTE:
1. Once the channel is assigned to a transmitter, you can only change it by removing the
batteries or resetting the unit.
2. Avoid placing the transmitter in direct sunlight, rain or snow.

WEATHER STATION:

1. Remove the battery door and insert 3 x AA batteries into the battery compartment.
Make sure you insert the batteries the right way round (see polarity information +/
- in the battery compartment).
2. Close the battery compartment.
3. Press reset button to re-start the clock and it will synchronise the channels of the
transmitter automatically.
NOTE:
1. If extra transmitter is added in the future, press reset button to re-start the clock and
synchronise the channel once again.
2. The building material and the position of the receiver and transmitter affect the effective
20
NOTA: DES ICÔNES DE NIVEAU DE CONFORT (Pour C-8123 seulement)
Des icônes de niveau CONFORT, SEC et HUMIDE vous indique quel est l'environnement
actuel.
ENREGISTREMENT DE PRESSION de 24 HEURES PASSÉES
La pression barométrique historique et courant s'affiche sur la fenêtre de pression
atmosphérique. La pression atmosphérique peut être montrée dans mb/hPa ou inHg en
choisissant le commutateur de pression atmosphérique au cas en arrière.
Vérifier l'historique de pression pour certaine heure pendant la 24 heure passée, Appuyer
le bouton d'HISTORIQUE. Chaque appui sur ce bouton va retourner d'une heure. Les
changements atmosphériques enregistrés pendant les 24 heures passées sont montrés
dans un graphique en barres au-dessus de la fenêtre de pression atmosphérique.
A PROPOS DE LA PHASE DE LUNE :
Cette unité comporte 8 phases de lune différentes qui varient selon le calendrier lunaire.
1. Nouvelle lune.
2. Croissant waxing.
3. Premier trimestre.
4. Waxing Bossu.
5. Pleine lune.
6. Diminution de Bossu.
7. Dernier quart.
8. Diminution de croissant.
41