Fakir HYPO CLEAN Benutzerhandbuch Seite 24

EN
Fill the tank with 400ml of
tap water.
Put the appliance in the body
(Standby Mode).
NOTE!:
Use general tap water at 5-35 °C. Do not use ground water, dirty or treated water. It is
extremely normal to get a slight chlorine smell during operation.
CAUTION!
In order for the appliance body to work, the spray bottle must be on the appliance
body.
NOTE!:
The operating options of your appliance are described in detail in the quick user
guide. You can operate your appliance with or without salt, depending on the area of
use and purpose. This process is an important feature to determine the areas of use
of the electrolyzed water.
Add a spoonful of salt (0.5 g).
Attention must be paid not to
exceed 0,5 g salt.
Press the Start Button and select the
desired mode (you can turn off the
appliance by pressing the button for
5 seconds)
24
After putting the spray head
on the water bottle, shake
the bottle for salt dissolution.
Once electrolyzed water
production is finished, you
can spray this water to the
desired spot.